Online4US is modular and the number of configurations is virtually limitless. In 7 steps, this configurator allows you to define the necessary configuration for your needs.
Including the CPU module, a colour touch screen display, an IP65 enclosure and supporting up to 32 measurement channels.
You can have up to maximum 32 sensors.
Threaded sensor, M6 thread.For the monitoring of bearings, gearboxes, lubrication, partial discharges, valves and steam traps.
Information
Open airborne ultrasound sensor & Tight (IP65) airborne ultrasound sensor.For the monitoring of partial discharges and for leak detection.
Accelerometer, bandwidth 10Hz and 1000Hz.For the monitoring of generic defects as imbalance, alignment, foundations, coupling and belt wears...
Cable RS2T
Module
RS2T sensor
Open sensor
Cable accelero
Accelero sensor
Module of 8 digital inputs for measurement starting according to a trigger condition :
Module of 8 analog inputs, measuring range 0 to 10 VDC, for measurement starting according to a DC voltage trigger condition (speed rotation coming from a DC tachometer output).
Module of 8 AON digital outputs for the wired transmission of the alarm status danger and warning.One module is enough when the number of measurement channels is less or equal to 16.Two modules are required from 17 to 32 measurement channels.
GSM module for transmitting via SMS the information Danger and Alarm when an alarm is triggered. M2M subscription and SIM card are not provided.
RF module for radio transmitting the information Danger and Alarm when an alarm is triggered.
Power supplied to Online4US :
With 0,6A for 115 VAC and 0,3A for 230 VAC
You still have characters